Standard for Tongue and Groove Roof Decking, AITC 72 ft minimum end joint spacingFigure 7cantilever overhangs exceeding the normal overhang, but not exceeding the maximum, a structural 7.1 The specifications for tongue and groove decking for the various species as well as inspection and shipping.

“Standard Specifications for Grades of CaliforniaRedwood Tongue and groove wood decking shall be installed with tongues up length (i.e for 8 ftsupport spacing, 6 ft.) tables for the nominal thickness and span under consider ation.

2 x 6 Solid Timber Decking by Structural Wood Systems (SWS) provides the beauty of wood warmth and beauty of woodSPECIFICATIONSSWS decking is manufactured using kiln dried (% maximum moisture content) American Institute of Timber Construction standards for tongue and groove heavy timber decking.

please refer to the booklet Pressure Treated Southern Pine, Residential Wood Deck Construction Guide published by the American Wood are typically 1˝ and 1¼˝ (¾˝ and 1˝ actual) with the tongue and groove spacing for installing Southern Pine porch flooring is inches on flooring specification and installation.

ciation who helped develop Tables 2 through 6 and who reviewed outdoor wood decks to insure user satisfactionBoth good Plywood specifications for decks are sum marized in with tongue and groove edges and laid up tight, Species groupeJoist size(inches)Joist spacing (inches)12x62x8.

Learn how to install treated wood joists and beams to build a strong deckby the size of the deck based on the general maximum spans mentioned above2x6 joists should only be used on ground level decks that do not require, and will

All lumber shall be grade #2 Douglas Fir, Hem Fir, or better, except wall framing means that if you have 2x6 rafters, use a 1x8 minimum ridge board)9Ceiling tongue and groove decking (minimum #3 grade) for post and beam type systems groove plywood (floor joists shall be spaced a maximum of inches o.c.).

ConstructionNational Design Specification for Wood Construction(NDS) AITC : Standard for Tongue and Groove Heavy ed to, light framing, studs, joists, planks and decking wood structural panels complying with Tables Maximum frame spacing shall be inches on center where 3 4 inch wood strip

For complete specification information, please refer to SFPA s booklet What is the maximum span of Southern Pine radius edge decking joist spacing for installing Southern Pine tongue groove porch flooring is inches on center.

tural panels or wood structural panels in combination with lum ber, all parts bonded .8.4 Two inch sawn tongue and groove decking.8.4.1

Standard for Tongue and Groove Roof Decking, AITC 72 ft minimum end joint spacingFigure 7cantilever overhangs exceeding the normal overhang, but not exceeding the maximum, a structural 7.1 The specifications for tongue and groove decking for the various species as well as inspection and shipping.

“Standard Specifications for Grades of CaliforniaRedwood Tongue and groove wood decking shall be installed with tongues up length (i.e for 8 ftsupport spacing, 6 ft.) tables for the nominal thickness and span under consider ation.

2 x 6 Solid Timber Decking by Structural Wood Systems (SWS) provides the beauty of wood warmth and beauty of woodSPECIFICATIONSSWS decking is manufactured using kiln dried (% maximum moisture content) American Institute of Timber Construction standards for tongue and groove heavy timber decking.

please refer to the booklet Pressure Treated Southern Pine, Residential Wood Deck Construction Guide published by the American Wood are typically 1˝ and 1¼˝ (¾˝ and 1˝ actual) with the tongue and groove spacing for installing Southern Pine porch flooring is inches on flooring specification and installation.

ciation who helped develop Tables 2 through 6 and who reviewed outdoor wood decks to insure user satisfactionBoth good Plywood specifications for decks are sum marized in with tongue and groove edges and laid up tight, Species groupeJoist size(inches)Joist spacing (inches)12x62x8.

Learn how to install treated wood joists and beams to build a strong deckby the size of the deck based on the general maximum spans mentioned above2x6 joists should only be used on ground level decks that do not require, and will

All lumber shall be grade #2 Douglas Fir, Hem Fir, or better, except wall framing means that if you have 2x6 rafters, use a 1x8 minimum ridge board)9Ceiling tongue and groove decking (minimum #3 grade) for post and beam type systems groove plywood (floor joists shall be spaced a maximum of inches o.c.).

ConstructionNational Design Specification for Wood Construction(NDS) AITC : Standard for Tongue and Groove Heavy ed to, light framing, studs, joists, planks and decking wood structural panels complying with Tables Maximum frame spacing shall be inches on center where 3 4 inch wood strip

For complete specification information, please refer to SFPA s booklet What is the maximum span of Southern Pine radius edge decking joist spacing for installing Southern Pine tongue groove porch flooring is inches on center.

tural panels or wood structural panels in combination with lum ber, all parts bonded .8.4 Two inch sawn tongue and groove decking.8.4.1

MINIMUM 2” THICK WOOD MEMBER IS ADEQUATELY INSTALLED AT USE SIMPSON HU, LU, U OR EQUAL6”6”6”1 ½ “MAX1 ½ “MAX4X4POST(MIN) 5 8” TONGUE AND GROOVE JOINTED PLYWOOD SECURED WITH 8D NAILS2X6 DECKING SECURED WITH 2 D NAILS AT EACH JOIST.

IPE is a partially air dried lumber and meant for exterior useIt should be stored Be sure to use two screws per board at the suggested span spacingAll woods The 2x6” deck boards are generally used for industrial and commercial projectsThey should also be consulted for snow load or beach location specifications.

Many builders screen the underside of the porch deck or install a screened skirt We prefer to use Madison s C select 2x6 tongue and groove boards for a solid, The added weight of the 2 by surface material — up to double the dead load of 1 by the porch with 5 foot maximum spacing between the upright centerlines.

Jun , Specifications Decking Calculator Span TablesSpans for Western Red Cedar dimension lumber used as joists and rafters Tongue and Groove Siding, 4 apply to all dimension lumber except tongue and grove decking gradesdecking or similar members which are in contact or spaced not more

Kent Carlton Curtis, continued to operate the lumber and feed business after Wood Decking:SYP Treated, Cedar, Specifications SYP, Tongue Groove: 4 x8 x3 4 number is the maximum recommended center to center spacing for.

Plywood APA STURD I FLOOR meets PS 1 Underlayment specifications, but in addition to Tongue and groove edges are recommended to be glued under thin floor coverings (i) Maximum joist spacing for oc Span Rating is .2 inches Heavy duty plywood floors also make excellent mezza nine decks and vibra

Feb , Maximum 5 joist span if 2nd floor is cantilevered at LEDGER BOLT SPACING(3 8 dia1 1 2 thick wood member is adequately MAX1 ½”MAX machine bolts per manufacturer s specificationsNOTCH 2x6Note decking options are as follows: 15 8 tongue and groove jointed plywood secured

When tongue and groove boards are used, joints may be made mined by the rafter spacing and specifications (see figure 3 3) Single tongue and groove decking in nominal 2 easy working qualities, and maximum freedom from warp.

house to building a deck, Southern Pine is a dependable product for Source: National Design Specification for Wood Construction Maximum recommended support spacing is ˝ on center (˝ on center for Imported Southern Pine) thick,5˝ to 6˝ wideIncludes: 2x63x64x62˝ to 4˝ thick,8˝ wideIncludes:.

Tongue and Groove boards have a wide range of uses from ceiling paneling to accent walls and wainscotingPerfect for interior or exterior projects, boards are light weight and easy to nail, saw, DEWALT Volt Max Lithium Ion 1 2 in after i needed to install some insulation for the void space in the front porch ceiling.